Paintball Laser Engraving

Laser engraving is a cheap and easy way to customize and add a personal touch to your gun. Laser engraving removes the dye in the top anodizing layer, but does not remove it or alter the body in any way. In most cases it will not even void your warranty. At LaserMyGun.com, we work with you from start to finish to ensure that the job we do, is the job you want. To see examples of our work, be sure to look at the gallery page.

The engraving process

Our machine works at very high graphic resolutions, and to get the best possible outcome, we recommend the graphic to be in a vector format. If you cannot, or don't know how to convert a graphic into a vector format, we can do it for you for a $10 fee. We can work with raster graphics, but they must be a minimum of 400dpi in resolution (600 is recommend). The machine recognizes all black in the graphic and engraves it, so your artwork must be monochromatic. Half tones, and colors in between can confuse the machine and distort your engraving. To prevent unwanted movement inside the machine we require the gun to be dissassembled so it can sit level during the engraving process.

What to do before sending us your gun:


• Completely disassemble the gun and remove any air fittings (a $50 fee will be charged if this is not done). If you are unsure what to remove, email us and we will let you know
• Send the graphic file in an email or include on a disk with your name and gun in the title (ie: John_Doe_Dm7.ai)
• A printout with your name, return address, and job description. If you do not include this there could be a delay in the engraving and return of your gun.

Other laser engraving

On top of laser engraving guns, we also offer engraving on many consumer electronics. Engraving is an easy way to add that personal touch, or add an extra bit of theft security to your investment.
We can engrave on just about anything anodized, wood, plastic, or rubber, but here is a small list of popular non-paintball items we can engrave:

• Ipods with polished backs (engraving will be black)
• Ipods with anodized backs (engraving will be white)
• Iphones
• Macbook Pros
• Various plastic laptop lids
• Various cell phones
• Leather wallets
• Aluminum, plastic, or wood picture frames
• Trophies and award plaques

Pricing will vary depending on the item and the engraving job, so feel free to send us an email at laser@lasermygun.com or give us a call at 714-226-0010 for a price quote.



Here is a small gallery of some of our non-paintball engravings

Anodizing

Prices:


• 1-color full gun anodizing: $125
• 2-color full gun anodizing: $150
• 2-color fade: $175
• 3-color fade: $200
• 1-color splash (1 base color, 1 splash color): $175
• 2-color splash (1 base color, 2 splash colors): $200
Prices are up to 20 pieces off the same gun.
• $7.50 per piece
10 piece minimuum. If you do not have 10 pieces, the minimum price is $75 plus $7.50 for each aditional piece.

• Bead blasting: $75 for up to 10 pieces, $100 for full gun.
• Polishing: $75 for up to 10 pieces. Each individual piece: $5
• Please note: Polishing is a manual process done by hand, thus it is impossible to guarantee a 100% match among your parts. We do our best to ensure a match, but many times it is not possible to see a difference until after the anodizing process

Color Table